AERZEN Delta Lube 06 (1L)

AERZEN DELTA LUBE 06 is a synthetic oil specially formulated for the AERZEN DELTA series of compressor technology. Its high temperature stability and oxidation resistance, stable viscosity at high temperatures and excellent low temperature fluidity ensure complete lubrication at all stages of operation and thus extend the service life of blowers and compressors. A balanced selection of additives protects the oil and equipment against corrosion and ageing.

Advantages AERZEN DELTA LUBE 06:

• Low maintenance and operating costs due to long oil change intervals of up to 12,000 operating hours in oil-injected screw compressors.
• Easy conversion from mineral oils due to the neutral sealing characteristics of the oils.
• Minimal oil vaporisation due to high vaporisation stability and therefore clean (oil- free) compressed air and an oil-free compressed air network when compared to conventional mineral oils. Avoidance of unnecessary cleaning costs and unplanned pneumatic valve downtimes caused by resin saturation.
• Minimal formation of oxidation residue in the oil circuit, leading to low operating costs due to the long service life of the oil filter and separator.

AERZEN DELTA LUBE 06  is an oil for air compressors based on synthetic ester oil with special additives. This oil can be mixed with mineral oils and synthetic hydrocarbon oils. Delta Lube 06 cannot be mixed with polyglycol-based oils. Delta Lube 06 is particularly resistant to ageing and oxidation. It boasts an excellent viscosity temperature response.

DELTA LUBE 06 has been designed especially for the lubrication of screw compressors under high stress. The oil is designed to allow for oil change intervals of up to 12,000 operating hours* in oil-injected screw compressors.

Delta Lube 06 can also be used for the conversion of used compressors that previ- ously ran on mineral oils. Delta Lube 06 exhibits largely neutral behaviour compared to the typical elastomers** used in air compressors. There is little likelihood of leak- ages.

With its synthetic base oil, Delta Lube 06 provides improved oxidation resistance when compared to conventional synthetic oils.

The development of oxidation residue in the compressor is thus reduced which, along with long oil change intervals, contributes to an extensive service life for the oil filter and separator. Special inhibitors in the oil keep the compressor clean from within, allowing for high levels of efficiency.

Thanks to the vaporisation-resistant base oil, the proportion of oil vapour in the com- pressed air can be reduced considerably compared to conventional mineral oils. This contributes to lower oil consumption and cleaner compressed air. In addition, the resin saturation typical of pneumatic valves can also be avoided within the compressed air network thanks to the low oil content of Delta Lube 06.

Benefits from AERZEN DELTA LUBE 06 

• Reduced maintenance and extended machine life
• High temperature and oxidation resistance
• Constant viscosity during temperature changes
• Excellent flowability at low temperatures
• No grease change required after the first 500 hours of operation
• Extended oil change intervals up to 12000 hours
• High level of protection against corrosion and ageing
• Guarantees optimum performance and long life of blowers and compressors
• Resistance to temperature, humidity and mechanical loads